Utility Pads

Shed Pad

Shed pad installed to the left of the swing set box
Excavation: utility pads, Atkinson, NH


This is a shed pad installed to the left of the swing set box

Gravel & RAP driveway installation

pad installed for storage beside the garage
Excavation: utility pads, Atkinson, NH

This sloping gravel driveway installation which was originally for construction site access only. It needed a completely new base layer and top coat. Good thick base of crushed gravel for stability with a nice crown and a gravel top coat with a stone dust mix.

I had to add a few swales for drainage at the top of the driveway to control the erosion. There is water coming down 3 hills that meet their driveway entrance as they are in the valley.

Find out more

Harley Rake: Great Addition for grading, resloping and repairing gravel driveways

This 7 foot Harley Rake is great for prepping pads,  grading
Excavation: utility pads, Atkinson, NH

Harley rake has many uses: grading, repairing gravel driveways, crowning gravel driveways and roads as well as preparing new lawns for seeding. 

Great multipurpose attachment!

Excavating: Small utility pad

Crushed Gravel 2 tier pad  for camper and trailer storage
Excavation: utility pads, Atkinson, NH

This 2 tier utility pad was installed for a camper and small utility trailer.

Excavating: Crushed Gravel Pad, 30' x 60' has been installed for addition parking

Crushed Gravel 30' x 60' utility pad by Excavation: utility pads, Atkinson, NH

The prep for this pad consisted of stump grinding a large stump and removing several trees. Then putting down a base coat of 1 1/2" crushed gravel followed  by a top coat of 3/4 crushed gravel with a stone dust mix. 

Customer was very excited with the completion.

Excavation: Crushed Gravel Pad, 30' x 60' has been installed for addition parking

Crushed Gravel 30' x 60' utility pad by Excavation: utility pads, Atkinson, NH

The prep for this pad consisted of stump grinding a large stump and removing several trees. Then putting down a base coat of 1 1/2" crushed gravel followed  by a top coat of 3/4 crushed gravel with a stone dust mix. 

Customer was very excited with the completion.